Austro Flamm Dexter Инструкции пользователя - Страница 7
Просмотреть онлайн или скачать pdf Инструкции пользователя для Крытый камин Austro Flamm Dexter. Austro Flamm Dexter 20 страниц.
Печатать страницу
english
1.
TECHNICAL DATA
As a stove of construction type 1, it is possible to connect
it to the chimney together with an exisiting other stove or
another hearth for solid fuels, as long as the chimney
dimensioning complies with DIN 4705, Part 3.
TECHNICAL DATA
Height
Width
Depth
Weight
Flue pipe outlet diameter
Nominal thermal output (EN 13240)
Maximum thermal capacity
Smallest heating capacity
2. IMPORTANT INFORMATION
The installation and operation information given here is of
general nature. National and European standards, local
and building regulations as well as fire prevention laws
must be observed during the operation of the stove
General safety instructions for the
operation of your stove
Thoroughly read the entire manual before starting up
•
your stove and observe the caution notices.
Your heating unit may not be moved without
•
approved means of transport with sufficient load-bearing
capacity.
Your heating unit is not suitable to be used as a stand
•
or as a ladder.
Please keep in mind that your
•
stove's surface heats up considerably
during
operation.
We
recommend wearing a safety mitten
when operating your stove.
Attention – stove varnish is no rust prevention!
•
Make your children aware of this particular danger
•
and keep them at a distance from the heating unit
whenever it is in operation.
Only burn approved fuels and materials listed in the
•
chapter "Clean Burning".
The burning or placing of flammable or explosive
•
materials, like empty spray cans and such like into the
firebox as well as the storage of such materials in the
immediate vicinity of your heating unit is strictly forbidden
due the danger of explosion.
Do not wear loose or flammable clothing when adding
•
fuel to the fire.
Placing non-heat-resistant objects on the heating unit
•
or in the vicinity of the heating unit is forbidden.
955 mm
618 mm
382 mm
145 kg
150 mm
6 kW
8 kW
3,5 kW
.
therefore
5
Room heating capacity
(depending on building insulation)
Exhaust values for multiple use of the chimney in
accordance with DIN 4705, Part 3 and for the
calculation of the chimney measurements in
accordance with DIN 4705, Part 2
Fluegas mass flow
Fluegas temperature
Minimum feed pressure
Nominal thermal output
Do not lay laundry onto the stove for drying. Laundry
•
hung up to dry must be kept at a safe distance from the
stove because of the danger of fire.
The woodstove DEXTER is no "
•
stove" (must hold embers for at least 4 hours).
During the operation of your heating unit it is
•
forbidden to use flammable or explosive materials in the
same or an adjacent room to the one in which your heating
unit is located.
Setting up your stove
Required safety distances
distances – see name plate - in Fig. 2)
a > 900 mm
b > 230 mm/900 mm
c > 230 mm
(a – toward the front in the radiated area)
(b – to the side steel panel/glass front)
(c – to the back)
Make sure that the room in which the stove is set up has at
least one door or window into the outside or is directly
adjacent to such a room. Other fireplaces and extractor
hoods must not be operated in the same room as the
stove
.
Floor load capacity
Make sure that the load capacity of the supporting
construction is sufficient to carry the weight of the entire
, before the heating unit is installed.
unit
Dexter
65–165 m³
closed
6 g/s
closed
350 ° C
closed
10 Pa
at 0.8 times
8 Pa
n. ther. outp.
slow combustion
(Minimum