dymax BlueWave AX-550 Инструкции по быстрому запуску
Просмотреть онлайн или скачать pdf Инструкции по быстрому запуску для Промышленное оборудование dymax BlueWave AX-550. dymax BlueWave AX-550 2 страницы. Flood lamp mounting stand kit
Также для dymax BlueWave AX-550: Руководство пользователя (16 страниц)
Печатать страницуQuick Start Instructions
BlueWave
®
AX-550 Flood Lamp Mounting Stand Kit (43410)
Unpacking and Setup Instructions
1. Remove the stand and carriage from the packaging.
2. Remove the cap and 2 fasteners from the stand's upright. These are push-in fasteners, not screws, and can
easily be removed by pushing upward on the plate (Figure 1).
Fasteners (2X)
Cap
Stand's Upright
Figure 2. Attach the Carriage
Figure 1. Remove Cap and Fasteners
3. Using a 4-mm hex key, attach the carriage to the emitter using the screws supplied with the carriage. (Figure 2)
4. Slide the carriage onto the stand upright, being sure to align bearing pads and t-nut into slot (Figure 3).
Figure 3. Slide Carriage into Stand