Dymo 9000 Руководство - Страница 5
Просмотреть онлайн или скачать pdf Руководство для Изготовитель этикеток Dymo 9000. Dymo 9000 6 страниц.
Печатать страницу• Press
to select the label required and return to
edit mode (the selected label will appear in the
workspace) or:
• Press
to cancel and return to the MEMORY
ESC
options; press
again to cancel the MEMORY
ESC
function and return to edit mode.
To clear a label from the memory:
• Press
; STORE will flash.
MEMORY
• Press
until CLEAR flashes.
• Press
to select CLEAR, then use
select the label to be cleared.
• Press
to clear the selected label from the
memory. The display will return to MEMORY
options, with CLEAR flashing.
• Repeat the above for each label to be cleared.
• Press
to return to edit mode.
ESC
SYMBOLS
SYMBOLS
Press
to show symbols and special characters,
SYMBOLS
some of which are not available direct from the
keyboard. The display will show:
PUNCT.
LANG.
TECH.
MISC.
SIGNS
ALL
• Press
or
to step through the options
available, then press
option, confirmed by the first symbol in the list
becoming highlighted and a large version of that
symbol appearing in the display.
• Press
,
,
or
symbols available, then press
mode and insert the selected symbol in the label
workspace at the cursor position, or:
• Press
to cancel and return to the symbols menu.
ESC
SPECIAL
SPECIAL
COPIES
CHAIN
COLOUR
INVERSE
PERS. STORE
PERS. RECALL
COPIES
• Press
to select between:
SAME – for several copies of the same label, or
INCR. which increments the right-most number on a
label by 1 - 99, ready for the next print command.
• Press
then use
the number shown in the box, or use the number
keys to enter the number required.
CHAIN
• Press
to select CHAIN printing of labels with a
short 6mm (
1
/
") leader and trailer. A row of vertical
4
dots will be printed between each label as a cutting
or
! ¡ ? ¿ # & @ $
£ ¢ ¥ F – ± ( )
r
: ;
< > \ [ ]
§ { } = – / X —
% - " ' , .
to select your chosen
to step through the
to return to edit
INCR.
2
or
to increase or decrease
guide; the final label in the chain will be cut and tab-
cut. Only operates if more than one label set to print
(see COPIES), confirmed by
COLOUR
• Press
point, confirmed by
the colour break will be shown as a vertical dotted
line in the display; this line is not printed on the
label.
• Printing will stop when the colour break is reached.
to
ink cassette to an alternative colour.
INVERSE
• Press
confirmed by
bar in edit mode.
PERS. STORE
• Press
settings in the memory, confirmed by
display. Any settings previously stored will be
replaced by these settings.
PERS. RECALL
• Press
settings from the memory, confirmed by
display.
• Press
ESC
• Press
personalised label settings in the label workspace at
the cursor position. All subsequent characters
entered will conform to your personalised settings.
NOTE: Global functions, eg INVERSE, will be applied
to the whole label.
SET UP
SET UP
PREVIEW
• Press
• Press
ESC
• Press
ESC
CASSETTE
• Press
• Press
Note: If the tape size selected is different from the
tape cassette installed, the Labelmaker will give a
warning message if you try to print on a tape
narrower or wider than the tape size selected. Either
change the cassette to the correct size for printing,
or change the label design and tape size to suit the
cassette size. See 'Troubleshooting'.
CUTTER
• Press
(useful when printing several copies of the same
6
in the display.
to insert a colour break at the cursor
in the display. In edit mode,
will appear to prompt you to change the
for the label to be printed
in the display and by
to store your current personalised label
to recall your current personalised label
to cancel and return to edit mode, or:
to return to edit mode and insert your
PREVIEW
CASSETTE
32 MM
CUTTER
CUT TAB
LANGUAGE
ENGLISH
UNITS
MM
PC LINK
to display a preview of the actual label.
to return to the options menu.
again to cancel and return to edit mode.
to display a list of label sizes.
or
to select the tape size required.
to choose between TAB cut ONLY
inversed
,
in the status
I
in the
in the