BeneCheck BK3-12M-D Руководство пользователя - Страница 7
Просмотреть онлайн или скачать pdf Руководство пользователя для Измерительные приборы BeneCheck BK3-12M-D. BeneCheck BK3-12M-D 16 страниц. Multi-monitoring meter
Печатать страницуChapter 3
How to Perform a Test
Please follow the instruction carefully to ensure an accurate test result.
3.1 Before Testing
Materials you need to perform a test:
• BeneCheck Meter
• BeneCheck Test Strip
• Lancing Device/ Lancets
• Tissue or cotton ball with 75% ethanol or disinfection wipes for cleaning the sampling area
before test.
Lancet Holder
Depth Indicator/
Adjustable Tip
(for fingertip sampling)
Adjustable AST Tip
(for alternate site
sampling)
Penetration Depth
Shallow
Note:Wash your hands with water and soap
thoroughly before and after testing, and
make sure the sampling area is dry before
testing.
9
Ejection System
Sliding Barrel
Release Button
Deep
1
2
3
4
5
Beijing Riucheng Medical Supplies Co.,Ltd
Fengxiang Avenue, Fengxiang
Development Zone, Yangsong Town,
Huairou District, Beijing 101400 China
TEL:+86-10-61678701
3.2 Perform the Test
1
• Twist and remove the
adjustable tip.
• Insert a lancet into
the holder firmly.
3
• Twist back the tip.
• Adjust skin
penetration depth by
turning the front end.
5
• Insert the strip
contact bar into meter
test port.
• The meter will turn on
automatically.
7
• Pull back the sliding
barrel till it clicks, and
the lancing device is
ready to use.
2
• Twist and remove the
protective disk.
• Save the disk for discard use.
• Do not twist the lancet.
4
• Take out a test strip and close
the vial immediately, or other
strips will get damp.
Test Strip
7142
Control Range
Operation
6
• Make sure the code numbers
are the same on screen and
strip vial label in CHOL or UA
test.
• You can start testing after
" " appear.
Note:If "
" does not appear, remove the
unused strip and repeat step 5.
8
• Hold the lancing device firmly
against sampling site.
• Press the release button.
10