Dymo LP200 Руководство пользователя - Страница 2

Просмотреть онлайн или скачать pdf Руководство пользователя для Изготовитель этикеток Dymo LP200. Dymo LP200 7 страниц.

Печатать страницу

Introduction

The Dymo LabelPoint 200 enables you to create a wide

variety of high quality self-adhesive labels of up to 90

characters.

The LabelPoint uses 6mm (

(

") wide tape cassettes in a number of label colours.

Labels are back slit for easy removal from the backing

tape. Text can be printed horizontally or vertically in a

variety of sizes and styles and can be left-justified, right-

justified or centred on the label.

Visit www.dymo.com for information on obtaining tapes

and accessories for your LP200.

Warranty Registration

Please complete the warranty registration card and return

it to the relevant address, within seven days– see the

warranty booklet for details.

Power Supply

BATTERIES

• Apply pressure to thumb catch then open and lift away

battery compartment cover – see fig

• Insert six size AA alkaline or re-chargeable Nickel-

cadmium batteries, observing the polarity markings

, and close the cover.

• Remove batteries if the LabelPoint is to be unused for

some time.

AC ADAPTOR (optional)

• Connect the AC adaptor to socket

adaptor plug disconnects the supply from the batteries.

• Unplug the AC adaptor from the LabelPoint before

disconnecting the mains power to the adaptor,

otherwise last label memory settings may be lost (see

also ON/OFF).

Changing the cassette

• Press catch in and open hinged access door

• Hold as shown, then lift cassette

out.

• Ensure tape and ribbon

cassette and tape passes between guideposts before

installing as shown. If necessary, turn spool

clockwise to tighten ribbon.

• Check that cassette switch

– see page 2. A notch in the cassette will fit over the

switch when it is set correctly.

• Insert cassette with tape and ribbon positioned as

shown between print head

• Push firmly

until cassette clicks into place. Ensure

tape and ribbon are positioned correctly.

• Close door

until it clicks shut.

"), 9mm (

") or 12mm

, page 2.

. Inserting the

straight up and

are taut across mouth of

B❹

B❺

is set for the cassette type

and pinch roller

Creating your first label

You will no doubt be anxious to see what your

new LabelPoint 200 can do. Before we go on to explore

the many advanced features of the LP200, follow these

simple steps to create your first label:

1. Fit the batteries, or connect the AC adaptor, plug in and

switch on at the wall socket - see 'Power Supply'.

2. Open the cassette compartment lid and check that the

tape cassette is fitted correctly – see page 2 and

'Changing the Casette'.

3. Close the lid, then press

The display should look like this:

4. Use the keyboard to type in your full name.

Each character you enter will appear on the display, for

example:

• For an UPPER CASE character, press and hold down

followed by the character required.

• Press

CAPS

CASE.

• Press the space bar once for the space between each

name.

If you make a mistake, press

then type in the correction.

5. When you have finished, press

printed and will emerge from the slot in the top right

hand side of the machine. Wait until the mechanism

has stopped, then press the cutter lever E to cut off the

label and remove it from the machine.

You should now have a high quality printed name label —

don't waste it! If this is your personal machine, why not

fix the label to the underside to identify its owner? You

have just found the first of many uses for your DYMO

labels.

to switch the power on.

Cursor flashing

DYMO

for all subsequent characters in UPPER

DEL

. A label will be

DYMO

to delete the error,