Dymo Rhino 3000 Industrial Label Printer Руководство по эксплуатации - Страница 8
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Изготовитель этикеток Dymo Rhino 3000 Industrial Label Printer. Dymo Rhino 3000 Industrial Label Printer 17 страниц. Dymo corporation instruction manual printer rhinopro 3000
Также для Dymo Rhino 3000 Industrial Label Printer: Руководство по выбору (2 страниц)
Печатать страницу
Deleting a Label from Memory
When you no longer need a stored label, you can
delete it from memory.
To delete a label from memory
1. Press
. The memory locations are
RECALL
displayed.
2. Use the arrow keys to move to the memory
location that contains the label you want.
3. Press +
and then press
memory location.
Using the Hot Key Functions
Your printer includes several Hot Key
that allow you to print specific types of labels. Hot
Keys are available for printing flag, wrap, fixed-
length, distribution panel, and vertical labels.
HWRAP
When you select flag, wrap, fixed, or vertical print
modes, the labelmaker remains in that print mode
until you either select another hot key or select
normal mode.
To select normal mode
Press
+
.
♦
FLAG
Printing in Flag Mode
Flag labels wrap around a wire or cable leaving the
text part of the label extending out from the cable.
See Figure 10.
FM RM
FM RM
Figure 10
The default diameter is 3/8" (9 mm). The length of
the label tape between the label text ( ) is
approximately 1.1" (28.27 mm).
8
The text on flag labels is automatically printed on
both ends of the label leaving a blank space in the
middle that wraps around the cable. When the label
is applied to the cable, both ends of the label are
applied back to back leaving a tail or flag. The
result is a label that can be read from both sides.
To print a flag label
1. Press
2. Enter the text for the label and press
to clear the
ESC
Printing Wrap Labels
You can create labels that wrap around a cable or
wire. A line of text is placed horizontally or vertically
along the width of the cable, and repeated so that
functions
TM
you can read the label from any angle.
Horizontal Wrap Labels
Horizontal wrap labels can contain
letters, numbers, or symbols.
To print horizontal wire wraps
1. Press
2. Enter the label text and press
Vertical Wrap Labels
Vertical wrap labels are printed in a
fixed length of 1.5" (40 mm) and can
contain up to five letters or
numbers; but no symbols.
To print vertical wrap labels
1. Press
2. Enter the label text and press
FM RM
Printing Fixed-Length Labels
Normally, the length of the label is determined by
the length of the text entered. However, you may
wish to make a label for a specific purpose that is a
fixed length regardless of the length of the text.
.
FLAG
.
HWRAP
.
+
.
HWRAP
.
Left Speaker
Left Speaker
Left Speaker
Left Speaker
.