Dymo LabelWriter 400 Краткое руководство по эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Принтер Dymo LabelWriter 400. Dymo LabelWriter 400 8 страниц.

4. Loading Labels

1 Press the form-feed button to eject the labels that protected the printer during

shipment.

2 Open the top cover and remove the label spool.

3 Hold the spool spindle in your left hand and

place the label roll on the spindle so that the

labels feed from underneath.

4 Place the spool guide on the right side of the

spool and adjust it to fit snugly against the roll.

See Figure 7.

5 Insert the label spool into the slots in the

printer cover.

6 Cut the first label in half so that you have a clean

edge and insert the label into the label feed slot.

See Figure 8.

The printer feeds the labels, stopping at the

beginning of the first label. If the printer stops

without feeding the label, make sure the label is

fully inserted and then press the form-feed button.

7 Close the top cover.

You are now ready to print your first label.

Figure 7

Figure 8