Dyna E30 Руководство пользователя - Страница 7

Просмотреть онлайн или скачать pdf Руководство пользователя для Телефон Dyna E30. Dyna E30 17 страниц. Wifi phone

The information of the SIP server you're going to use is:

SIP server（domain）: 51.108.26.31 (or maybe in the form of: sip.wifi.cn)

User name (SIP phone number):123456

SIP phone number: 123456(phone number could be the same to user name

Password: 1234

The detailed settings are as follows:

A: Search Available WLAN

1. At standby mode, press the left soft key or OK key to enter the main menu. (The default initial

password: 000000)

2. Select Settings> WLAN setup, select one from the default 1-8 AP in WLAN setup, these eight

factory default configurations are empty, the default display is "Default + list No.".

3. After entering the "Options" menu, first select "WLAN Search". After searching, there will

be a list to show you the available AP, with security type and signal strength. Select the one

with highest strength (if this AP is permitted to use), press left soft key or OK key to setting.

Note: The security type of the selected AP was shown at the searched AP list. We take the type of

WEP-OPEN for example here; you can set other types by following the indication.

B: Connect WLAN

1. Set the SSID name WIFIAP first (the default name is the one you have just selected, the name

is consistent to AP currently), press left soft key or OK key to enter change menu.

2. Select Security Type> WEP-OPEN〉 WEP Key index〉 WEP Key 1, press left soft key or

OK key and enter the WEP-OPEN menu again. If the security type is "Open", go to Step 3

directly.

Select Key / Pass〉Passphrase/ Hex Key, press left soft key or OK key enter the Enter key

（Hex）mode, key of the SSID is the one of the AP you have just selected., then press the left

soft key or OK key enter change menu again.

3. Select IP setting> use DHCP (If the WLAN you selected support DHCP server), press left soft

key or OK key to enter change menu again.

You can also select static IP, follow the indications, and enter the IP address, net mask, gateway,

or not, that due to the setting of SIP server.)

Enter SSID

WIFIAP

Enter passphrase

WIFIAP

- 7 -

Enter hex key

WIFIAP