Agria 2294 271 Руководство по эксплуатации - Страница 5
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Подметальная машина для газонов Agria 2294 271. Agria 2294 271 20 страниц. Front mounted
Печатать страницу1. Safety Instructions
To prevent the sweeper from sliding on
slopes, make sure it is secured by an-
other person using a bar or a rope. This
person must be located at a higher po-
sition than the vehicle and at a safe dis-
tance from the attachment at work.
If possible, always work horizontally on
the slope.
End of Operation
Never leave the sweeper unattended
with the engine running.
Before you leave the sweeper, turn off
the engine.
Implements
Only mount implements with the engine
and the implement drive switched off.
Always use appropriate tools and wear
gloves when changing implements and
parts thereof.
For mounting and dismounting imple-
ments bring stands into proper position
and ensure stability.
Secure base machine and implements
against rolling off (wheel chocks).
Beware of injuries while coupling imple-
ments.
Mount implements as specified and only
couple at specified points.
agria Front Mounted Sweeper 2294071, -081, -171, -181, -271, -281
Weights
Always fit weights onto appropriate
weight mounting devices.
Maintenance and
Cleaning
Never carry out any maintenance or
cleaning with the engine running.
Before you work on the engine, always
remove spark plug connector (petrol
engine only).
Check regularly and, if necessary, re-
place all guards and tools subject to
wear and tear.
Damaged brush rollers must be
replaced!
Keep sweeper and implement clean to
avoid risk of fire.
Check nuts and bolts regularly for tight
fit and re-tighten, if necessary.
Do not carry out repairs like welding,
grinding, drilling, etc. on structural and
safety-relevant parts (e.g. coupling
devices, etc.)!
After maintenance and cleaning, ensure
that you re-install all safety devices and
guards and adjust them properly.
Only use original agria spare parts. All
other commercial spare parts must cor-
respond to quality and technical require-
ments specified by agria.
5