HHG Thomasville Whitney 48in Desk with Powerstrip SPLS-WH48D-TV Руководство - Страница 8
Просмотреть онлайн или скачать pdf Руководство для Внутренняя отделка HHG Thomasville Whitney 48in Desk with Powerstrip SPLS-WH48D-TV. HHG Thomasville Whitney 48in Desk with Powerstrip SPLS-WH48D-TV 13 страниц.
Печатать страницу
7
NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back
and fully tighten all bolts. This will make the assembly easier.
1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2. Glue the 30 mm Wood Dowels (7) into the end holes on the Stretchers (F and G) and the Apron
Decorations (H). Make sure that you use a small amount of glue with both ends of all dowels.
NOTE: It is very important to use a small amount of glue on both ends of dowels.
3
2
1
3. Attach the Left Front Leg (B) to the left front corner block of the Desk Top Apron (A) with two 70 mm
Bolts (1) and two Large Washers (2 and 3).
NOTE: DO NOT fully tighten all the bolts until the desk has been adjusted and level all the legs so that
they do not wobble. Once adjusted, go back and tighten while making sure that the unit remains level.
4. Insert the dowel of one Side Stretcher (G) into the hole of the Left Front Leg (B).
5. Repeat the same procedure to attach the Left Back Leg (D) at the opposite end. Fasten the Side Stretcher
(G) to the Legs (B and D) with the 45 mm Screw (5).
Assembly Instructions
F
H
7
7
B/D
B/D
A
7
G
7
7
H
H
7
7
5
G
A
8
7
7
G
H
G
D
B