5G HUB BG96 Техническое руководство пользователя - Страница 14
Просмотреть онлайн или скачать pdf Техническое руководство пользователя для Переключатель 5G HUB BG96. 5G HUB BG96 16 страниц. Nb-iot & gnss phone
Notes:
-
UART can be programmed through any of general-purpose pins.
-
SPI can be programmed through any of general-purpose pins.
2.8 PIN Description
PIN
DIRECTION
USB Connector
JST Connector
(Re-chargeable
battery)
Keypad LED
LCD
LED (NET)
LED (STAT)
Re-chargeable
battery LED
SD Card
MCU RESET
button
USB Switch
3.3V
5V
GND
A0
A1
SCL
SDA
AREFA
SCK
MISO
MOSI
CS
D0
D1
NB-IoT Phone 1.0
The NB-IoT Phone is powered from the USB port (3.8V-5V) or
I
from re-chargeable battery
2-pin connector for re-chargeable battery. Provides power from
IO
the re-chargeable battery and recharge the battery
O
Six keypad Backlight LEDs
O
2.4 inch, full color,
O
Indicate the BG96 operation status
O
Indicate the BG96 network activity status
Two LEDs indicating whether the re-chargeable battery is charging or is
O
done charging and full
IO
One SD card slot
I
Reset the MCU
I
1 switch to connect to the USB port directly to MCU or BG96
3.3V generated by the on-board regulator. Maximum current
O
drawn is 3A. The regulator also provides power to the MCU and
BG96
5V generated from the board. The board is supplied with power
O
from USB connector (typical 5V)
Ground
IO
Two analog inputs which can provide up to 12 bits of resolution
(i.e. 4096 different values). By default, each input measures
from ground to 3.3 volts, though is it possible to change the
upper end of their range using the AREF pin
IO
A0 can also be used as a DAC output and provides a 10 bit
voltage output with
Analog pins can be used as GPIOs
IO
I
2
C. The SCL (clock line). Can be used as GPIO
IO
I
2
C. The SDA (data line). Can be used as GPIO
Input reference voltage for the analog inputs used for either he
I
ADC or the DAC
IO
SPI Interface. Can be used as GPIO
IO
SPI Interface. Can be used as GPIO
IO
SPI Interface. Can be used as GPIO
IO
SPI Interface. Can be used as GPIO
IO
GPIO. Can be used as GPIO
IO
Copyright © 5GHUB.US
Description
240x320 pixel resolution
analogWrite()
function
TFT LCD
14