Gage Bilt GB704 Руководство по установке - Страница 4

Просмотреть онлайн или скачать pdf Руководство по установке для Инструменты Gage Bilt GB704. Gage Bilt GB704 13 страниц. Installation tool
Также для Gage Bilt GB704: Руководство (14 страниц), Оригинальное руководство по эксплуатации (20 страниц)

PRINCIPLE OF OPERATION

When the actuator lever assy is depressed, the pressurized air inside of the tool is released allowing spring

pressure to move the valve spool assy causing the air to be redirected. The air is directed to the top of the air

piston assy, moving it in a downward direction. The air below the air piston assy is then directed through the

valve sleeve and exhausted out of the bottom of the tool. Simultaneously, the piston rod assy connected to

the air piston assy is also moving down, forcing hydraulic oil up and into the front side of the head cylinder

assy, causing the piston to move to the rear of the head cylinder assy. The internal components of the

attached nose assembly are also moving with the piston to start the fastener installation. When the fastener

installation is completed, the actuator lever assy is released. Air pressure is then built up inside of the handle

causing the valve spool assy to return to its original position and reversing the sequence directing air

pressure to the rear of the head cylinder assy, causing the piston to move to the forward position.

CYLINDER

HEAD

OIL

PRESSURE

AIR

PRESSURE

AIR

PISTON

GB704 S/N: 3213 AND ABOVE

PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

HEAD

PISTON

ROD

AIR

PRESSURE

VALVE

SPOOL

EXHAUST

Image may not reflect actual tool.

AIR

PRESSURE

AIR

PISTON

AIR

PRESSURE

AIR

PRESSURE

AIR

PRESSURE

6/11 Rev. 9/14

AIR