Gage Bilt GB731OS/206 Руководство - Страница 10

Просмотреть онлайн или скачать pdf Руководство для Инструменты Gage Bilt GB731OS/206. Gage Bilt GB731OS/206 14 страниц.

HEAD

WARNING:

Dispose of hydraulic oil

Remove nose assembly from tool before attempting disassembly of head assy.

Remove end cap (731903). Push against piston (731909) to slide it out of rear of head cylinder (731910). Be careful not to damage

threads or cause burrs on polished piston (731909) surface.

The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite® #242 and torque

the four button-head cap screws (A-928) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).

S/N: 1118 AND ABOVE

PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

in accordance with all environmental regulations applicable in your area.

731134 - BACK-UP RING

(2 REQ'D)

731139 - SCREW-

PISTON ROD CAP

PISTON ROD ASSY (731333)

REV . 10/14