Gage Bilt GB54B Оригинальное руководство по эксплуатации - Страница 4
Просмотреть онлайн или скачать pdf Оригинальное руководство по эксплуатации для Электроинструмент Gage Bilt GB54B. Gage Bilt GB54B 16 страниц. Pneumatic installation tool
Также для Gage Bilt GB54B: Руководство пользователя (9 страниц)
Печатать страницу
WARNING:
Any other use is forbidden.
The GB54B pneumatic installation tool is designed specifically for the most efficient installation of blind fasteners. It will install aluminum
fasteners through 5/32" diameter, and through 1/8" diameter fasteners in any material. It weighs only 1.8 lbs. (0.82 kg) and can operate in
any position.
The GB54B Installation tool is 8.36" (212.4 mm) high, has a .740" (18.8mm) stroke and generates a minimum of 700 lbs. (3.11 kN) pull
load at 90 psi (6.2 bar). It operates on 90 psi-100 psi (6.2 bar-6.9 bar) of air pressure, with 90 psi. (6.2 bar) providing maximum efficiency.
At 90 psi. (6.2 bar) of air pressure, the GB54B does not exceed 81.5 dB(A) and consumes .29 SCF/cycle (8.21 L/cycle).
The air inlet is provided with 1/4-18 female pipe thread to accept the users air hose fitting.
NOSE ASSEMBLIES ARE NOT FURNISHED WITH THIS TOOL AND MUST BE PURCHASED SEPARATELY. (SEE NOSE ASSEMBLY
SELECTION CHART ON PG. 14).
WARNING:
Do not operate in an explosive atmosphere.
The GB54B can be operated between 0ºF — 118ºF (-17.8ºC / 47.8ºC)
GB54B S/N: 1088 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
DESCRIPTION
ENVIRONMENTAL USE
SPECIFICATIONS
Hand Held Weight
- 1.80 lbs. (0.82 kg)
Air pressure req'd
- 90-100 p.s.i. (6.2-6.9 bar) Max.
Air consumption
- .29 SCF/cycle (8.21 L/cycle)
Setting stroke
- .740" (18.8mm)
Noise level
- 81.5 dB(A)
Rated pull load
- 700 lbs. (3.11 kN)
Vibration
- Tested– No hazards found.
4
Rev. 10/22