Gage Bilt GB703 Руководство по установке - Страница 4

Просмотреть онлайн или скачать pdf Руководство по установке для Электроинструмент Gage Bilt GB703. Gage Bilt GB703 20 страниц.

WARNING:

Any other use is forbidden.

The GB703 is a pneumatic-hydraulic tool designed specifically for the efficient installation of a wide range of blind rivets. It weighs

4.50 lbs. (2 kg) and can be operated in any position with one hand. It has a .780" (19.8 mm) rivet setting stroke and a rated pull load of

2200 lbs. (9.8 kN) with 90 psi. (6.2 bar) air pressure at the air inlet.

The GB703 riveter operates on 90 to 100 psi. (6.2-6.9 bar) of air pressure, with 90 psi. (6.2 bar) providing the maximum efficiency. At

90 psi. (6.2 bar) air pressure, the GB703 does not exceed 81.5 dB(A) and consumes 3 cfm at 20 cycles a minute.

The air inlet is provided with 1/4-18 female pipe thread to accept the users air hose fitting.

UNLESS ORDERED RIVET SPECIFIC (I.E. GB703/4N), THE STANDARD GB703 IS FURNISHED WITH NOSE ASSEMBLY 6N-703-18

AND A SPARE NOSE TIP 10202 AND FOLLOWER 40307 TO CONVERT TO A 4N-703-18. ALL OTHER NOSE TIPS MUST BE ORDERED

SEPARATELY. WHEN ORDERING TOOL RIVET SPECIFIC, PLEASE CONTACT GAGE BILT FOR MORE INFORMATION.

WARNING:

Do not operate in an explosive atmosphere.

The GB703 can be operated between 0ºF — 118º

S/N: 3191 AND ABOVE

PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

DESCRIPTION

ENVIRONMENTAL USE

SPECIFICATIONS

Hand Held Weight

- 4.50 lbs. (2 kg)

Air pressure req'd

- 90-100 p.s.i. (6.2-6.9 bar)

Air consumption

- .16 SCF/cycle (4.53 L/cycle)

Hydraulic oil

- Automatic Transmission Oil,

Setting stroke

- .780" (19.8 mm)

Rated pull load

- 2,200 lbs. (9.8 kN)

Noise level

- 81.5 dB(A)

Vibration

- Tested- No Hazards Found

Dexron III, or equivalent.

4/12 Rev. 1/17