Gage Bilt GB703SRVT Руководство по установке - Страница 4

Просмотреть онлайн или скачать pdf Руководство по установке для Электроинструмент Gage Bilt GB703SRVT. Gage Bilt GB703SRVT 15 страниц.

PRINCIPLE OF OPERATION

When the lever assy is depressed, the pressurized air inside of the tool is released allowing spring pressure

to move the valve spool assy causing the air to be redirected. The air is directed to the top of the air piston

assy, moving it in a downward direction. The air below the air piston assy is then directed through the valve

sleeve and exhausted out of the bottom of the tool. Simultaneously, the piston rod assy connected to the air

piston assy is also moving down, forcing hydraulic oil up and into the front side of the head cylinder assy,

causing the piston to move to the rear of the head cylinder assy. The internal components of the attached

nose assembly are also moving with the piston to start the fastener installation. When the fastener installation

is completed, the lever assy is released. Air pressure is then built up inside of the handle assy causing the

valve spool assy to return to its original position and reversing the sequence directing air pressure to the rear

of the head cylinder assy, causing the piston to move to the forward position, simultaneously releasing the

spent pintail from the nose assembly, allowing it to be vacuumed into the pintail collection bottle.

Image may not reflect actual tool

9/14