Gage Bilt GB730 Руководство по установке - Страница 4
Просмотреть онлайн или скачать pdf Руководство по установке для Электроинструмент Gage Bilt GB730. Gage Bilt GB730 14 страниц. Installation tool
Также для Gage Bilt GB730: Руководство пользователя (13 страниц)
Печатать страницу
PRINCIPLE OF OPERATION
When the actuator lever assy is depressed, the pressurized air inside the tool is released allowing spring pressure to move the valve
spool assy, causing the air to be redirected. The air is directed to the top side of the air piston assy, moving it in a downward
direction. The air below the air piston assy is then directed through the valve sleeve and exhausted out of the bottom of tool.
Simultaneously, the piston rod assy connected to the air piston assy is also moving down, forcing hydraulic oil up and into the front
side of the head cylinder assy, causing the piston to move to the rear of the head cylinder assy. The oil from the rear of the head
cylinder assy is directed to the top of the piston rod assy inside the power cylinder. The internal components of the attached nose
assembly are also moving with the piston to start the fastener installation. When the fastener installation is completed, the actuator
lever assy is released. Air pressure is then built up inside of the handle assy causing the valve spool assy to return to its original
position and reversing the sequence.
CYLINDER
PRESSURE
HEAD
HEAD
PISTON
OIL
PRESSURE
AIR
PRESSURE
AIR
PISTON
REAR POSITION
S/N: 2317 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
OIL
PISTON
ROD
AIR
PRESSURE
EXHAUST
Image may not reflect actual tool
PRESSURE
VALVE
SPOOL
AIR
PISTON
4
OIL
PRESSURE
OIL
AIR
PRESSURE
FORWARD POSITION
AIR
PRESSURE
Rev. 2/15