Gage Bilt 1702 Инструмент для установки - Страница 10

Просмотреть онлайн или скачать pdf Инструмент для установки для Заклепочные инструменты Gage Bilt 1702. Gage Bilt 1702 14 страниц.

HEAD

WARNING:

Dispose of hydraulic oil in accordance with all environmental regulations applicable in your area.

Remove nose assembly from tool before attempting disassembly of head assy.

Remove end cap (731417). Push against threaded end of piston (731211) to slide it out of head cylinder (731298). Be careful not to

damage threads or cause burrs on polished piston (731211) surface.

The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite® #242 and torque

the four button-head cap screws (A-928) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).

GB731 S/N: 1702 AND ABOVE

PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

731134 - BACK-UP RING

(2 REQ'D)

731139 - SCREW-

PISTON ROD CAP

PISTON ROD ASSY (731333)

REV. 3/15