Frigidaire A Руководство по установке - Страница 6
Просмотреть онлайн или скачать pdf Руководство по установке для Диапазоны Frigidaire A. Frigidaire A 16 страниц. Gas & electric dryer
Печатать страницу
DRYER
DOOR
REVERSAL
INSTRUCTIONS
Be sure
to wear
gloves
while
reversing
the door
assembly.
You will
need
a square
drive
screw-
driver,
a Phillips
head
screwdriver
and pliers.
1.
Open the dryer door.
2. Remove the two screws that secure the door hinge to the front
panet.
Remove
the
bottom
screw
first.
Support
the
door
assembly
firmly
before
removing
the top
screw.
7.
Remove the two hinge attachment
screws, one square plug, two
round plugs and one metal strike from the inner door.
attacN
screw
3,
4.
5.
Hold the door near the top and bottom and lift to remove the door.
Place door assembly
face down on a padded, flat surface.
Pull out the two round plugs and slide the rectangular
plug up and out
of the front panel.
Use care to avoid scratching
the surface or
damaging the plugs.
Reinstall the plugs in Step 9.
plug
8.
Rotate the hinge and reattach it to the opposite side of the inner door.
9. Dispose of the old metal strike and install the new strike (included in the
literature
pack) in the opposite
side of the inner door.
Reinstall the
round plugs and square plug in the holes left by the hinge and hinge
screws.
10. Remove the hinge cutout plug.
Rotate it and install it on the opposite
side of the outer door.
6,
Remove
the five longer
screws
(I through
5) and the two shorter
screws (6 and 7) that attach the inner door to the outer door.
Do not
remove
any other
screws
at this time.
Separate
the inner door
from the outer door.
11. Reattach
the inner door to the outer door using the seven screws
removed in Step 6.
12. Holding the door at the top and bottom, insert the hinge post in the "T"
slot in the front panel and lower to align the screw holes.
While
supporting
the door, install the two screws removed
in Step 2.
Install the top screw first.
I3. Close the door.