Hi-Force AHP-BTU Series Руководство по эксплуатации - Страница 3
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Водяной насос Hi-Force AHP-BTU Series. Hi-Force AHP-BTU Series 19 страниц. Air driven hydraulic pumps
Печатать страницуUpon receipt of the product, visually inspect the item for any evidence of shipping damage. Please note:
the warranty does not cover shipping damage. Notify the courier immediately if shipping damage is found
and refrain from putting the product into service. The carrier is responsible for repair and replacement
costs resulting from damage that occurred in transit.
2.1 Introduction
Read and follow all the instructions and safety warnings carefully before handling, installation or
use of any hydraulic equipment. Failure to do so could lead to equipment damage, equipment
failure, personal injury or even death. Hi-Force will not be held responsible for any damage to the
equipment, injury or death resulting from the unsafe use of, lack of maintenance to, or incorrect operation
of the product. If in doubt on the correct use of any Hi-Force equipment, contact your nearest Hi-Force
office or distributor. Only qualified personnel should be allowed to operate hydraulic equipment. If an
operator has not been trained on high-pressure hydraulic equipment and its safe usage, consult your local
Hi-Force sales office or distributor who can offer training courses for operators.
2.2 Work Area Safety
•
Keep work areas clean and well lit. Cluttered spaces and inadequate lighting can result in
unnecessary accidents.
•
Keep bystanders clear of any hydraulic tool activity. Personnel working in close-range should be
made aware of all high-pressure work before commencing.
2.3 General Hydraulic System Safety Precautions
•
When operating any hydraulic equipment, all operators should ensure that all necessary personal
protective equipment (PPE) is worn, as specified by their employer. Steel toe-cap safety shoes,
safety glasses / visor, ear protection, and protective gloves should be worn at all times. All relevant
risk assessments should be completed before the use of the equipment.
•
Keep hydraulic equipment away from open flames and direct heat.
•
NEVER use a coupler as a tool handle, especially if the system is pressurised.
•
Inspect hoses regularly for damage and wear.
•
NEVER use hoses that are frayed, kinked, abraded or leaking.
•
NEVER handle a pressurised hydraulic hose. Hydraulic fluid escaping under pressure from a
ruptured hose can penetrate the skin and lead to a significant medical emergency, and in some
cases, death. Should this incident occur, seek out medical attention immediately.
•
Seek medical attention immediately if a hydraulic injection injury (no matter how minor) occurs.
NOTE: Images contained within this document are for illustrative purposes ONLY.
1.0 Inspection upon Receipt
2.0 Safety Precautions
Failure to observe and obey the following safety precautions could
result in property damage, significant personal injury or death;
Operating Instruction Manual:
OM-AHP-BTU-01
3
Serial Numbers:
FROM BQ 9522