Hi-Force AHP2-237BTU Руководство по эксплуатации - Страница 5
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Водяной насос Hi-Force AHP2-237BTU. Hi-Force AHP2-237BTU 19 страниц. Air driven hydraulic pumps
Печатать страницу•
DO NOT remove any labels from the product. Replace any damaged or unreadable labels
immediately.
•
Avoid loose clothing and jewellery that could get caught in moving parts, tie back long hair.
2.4 Hydraulic Pump Specific Safety Precautions
•
NEVER exceed the maximum rated pressure of any hydraulic equipment. Hi-Force manufactures
its AHP-BTU air driven hydraulic pumps to operate at a maximum working pressure of 1500 bar
(21,755 psi).
DO NOT connect hydraulic torque equipment with a lower pressure capacity rating to any Hi-Force
pump of this model series.
•
Make sure all equipment connected to the pump is in good working condition.
•
NEVER invert the unit or lay it on its side, either in use, in transport or in storage.
•
DO NOT weld any items to the pump unit or modify it in any way from its delivered condition. Your
warranty may be invalidated, and it could lead to serious personal injury.
•
ALWAYS ensure there is clear communication between the pump operator and the tool operator.
DO NOT operate the pump unless the tool operator indicates it is safe to do so.
Take extra care when multiple tools are being operated by a single pump. Make sure all tool
operators have given the go-ahead before operating the pump.
•
NEVER attempt to connect or disconnect a tool / hose / component while the system / pump is
under pressure.
•
NEVER leave a pressurised system unattended. If you must leave the area, release the pressure
and ensure the hydraulic release valve on the pump is fully open.
•
ALWAYS stand the pump on a stable, level surface during operation.
•
To protect your warranty, only use the hydraulic oil grade specified in Section 5.2.
Hi-Force declares that this product has been tested and complies with the standards set out in the relevant
EU directives. The EU Declaration of Incorporation / Conformity is included as Annex A to this instruction
document and is supplied with all shipments of this product.
Failure to observe and obey the following safety precautions could
result in property damage, serious personal injury or death;
Failure to observe and obey the following safety precautions could result
in property damage, equipment damage or minor / moderate personal
injury;
3.0 Declaration of Incorporation / Conformity
Operating Instruction Manual:
OM-AHP-BTU-01
5
Serial Numbers:
FROM BQ 9522