Hi-Force ATDP216 Руководство по эксплуатации - Страница 7
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Водяной насос Hi-Force ATDP216. Hi-Force ATDP216 15 страниц. Air driven hydrotest pumps
Также для Hi-Force ATDP216: Руководство по эксплуатации (9 страниц)
Печатать страницу
4.5 ATDP Specific Safety Precautions
•
NEVER exceed the maximum rated pressure or load capacity of any hydraulic pump. Hi-Force
manufactures its ATPD range of hydrotest pumps to operate at a maximum working pressure of
1489bar (21,596 psi). See Specifications
•
DO NOT adjust or remove the external pressure/air relief valve (ARV) on any Hi-Force product.
•
NEVER invert the unit or lay it on its side, either in use, in transport or in storage.
•
DO NOT weld any items to the unit or modify it in any way from its delivered condition. Your warranty
may be invalidated, and it could lead to serious personal injury.
•
NEVER exceed the maximum rated capacity of any hydraulic system component.
•
Keep hands and feet away from the hydraulic system during operation.
•
To protect your warranty, only use the fluids specified in Section 1.0.
•
When moving the unit, make sure all power cables and hoses are kept clear of the pump to avoid
damage.
Hi-Force declares that this product has been tested and complies with the standards and
declarations as set out in the Declaration of Incorporation/Conformity (DoI/DoC). The DoI/DoC is
included as Annex A to this instruction document and is supplied with all shipments of this
Failure to observe and obey the following safety precautions could result
in property damage, serious personal injury or death;
Failure to observe and obey the following safety precautions could result
in property damage, equipment damage or minor / moderate personal
injury;
5.0 Declaration of Incorporation / Conformity
Operating Instruction Manual:
OM-ATDP-01
product.
7
From Serial Number:
All