Hi-Force BPP107 Руководство по эксплуатации - Страница 6
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Водяной насос Hi-Force BPP107. Hi-Force BPP107 12 страниц. Battery powered hydraulic pump
Печатать страницу
Prepared by:-
Patrick Wright
REV NO:-
ECO:-
MAINTENANCE & ELIMINATE BREAKDOWN:
MAINTENANCE：
1. Q：Change oil or refuel oil:
A：Usually change fresh oil to keep its quality for lengthen its life and operate well. Always use Hi-
Force recommended hydraulic oil. Do not mix other brand oils together in case any damage to affect
its function.
2. Q: Prolonged storage without use:
A: 1. Take out the battery and charge if it will not be used for a long time. Discharge and charge battery
every two months to prolong its life.
2. Clean the tool and smear the anti-rust oil on crimping head and die before storage. Store the
battery and pump in a clean and dry environment.
ELIMINATE BREAKDOWN：
Q: How to add oil in the pump body?
1.
A: Turn the screw out by a "slotted screwdriver" and add oil in the pump body.
After filling it to full, turn the screw in it. <image 7&8>
Image 7: turn the screw out
Q: Operating the pump, but it cannot release and return to the origin position.
2.
A: Check the pump according to four steps.
<1> check the oil if it is not enough, (If no, choosing the suitable oil to fill.)
<2> check if there is any air in the oil reservoir, (add the suitable oil to full).
<3> check if there is impurities inside the reservoir, (renew the oil).
<4> check if there are impurities inside the body, (take apart the inner parts clean them then
reassemble).
BPP107 BATTERY POWERED HYDRAULIC PUMP
OPERATING INSTRUCTIONS
001
4294
Page 6 of 12
Approved by:-
Martin Davies
Image 8: add oil in it
TDS:-
1409
Date:08/10/14