Dyna-Glo DGY784BDP Руководство - Страница 12

Просмотреть онлайн или скачать pdf Руководство для Дымовая сигнализация Dyna-Glo DGY784BDP. Dyna-Glo DGY784BDP 15 страниц. Vertical gas smoker

ASSEMBLY INSTRUCTIONS

7. Attach the door locking brackets.

Align the door locking bracket (G) holes with

the holes on the upper right side of the smoker

body (I). Note: slots on the brackets (G) must

be facing up. Thread 2 screws (AA) through the

holes in the door locking bracket and into the

threaded holes of the smoker body (I). Tighten

the screws (AA) using a Phillips screwdriver.

Repeat on lower right side.

Hardware Used

M6x12 Screw

8. Attach the door handles.

Slide door handle (P) through brackets

in upper door. Using pliers, slide a spring clip

(CC) over the groove in the door handle as

shown. Repeat on bottom door.

Make sure both of the spring clips are securely

attached in the grooves of the handles.

Hardware Used

Spring Clip

9. Install the wood chip box and lid.

Slide the wood chip box (C) onto the lowest

cooking grate supports inside the smoker body

(I) and put the wood chip box lid (D) on top.