Hi-Force TWE Series Руководство по эксплуатации - Страница 7
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Электроинструмент Hi-Force TWE Series. Hi-Force TWE Series 20 страниц. Electric torque wrench
Печатать страницу
Prepared by:-
M.DAVIES
REV NO:-
1
ECO:-
1.6. ELECTRICAL SAFETY
If used outdoors or in wet room conditions the operator should ensure they comply with the relevant EN
standards!
Protect the tool from water and wet conditions this can cause short circuits and permanent damage to the
electronics.
Do not use the torque wrench if the motor housing or cable are damaged
Do not lift or carry the wrench by the electrical cable.
Before caring out any work on the electric unit, remove the plug from the mains supply.
1.7. OPERATOR
Minimum age: 18 years
The operator must carefully read and understand the operating manual before using the torque wrench.
The operator should always act responsibly in their work area and with regard to other persons in the
vicinity.
2. TECHNICAL DATA
Mains
Frequency
voltage
230 V
50 Hz
3.0
OPERATION
The wrench should only be put into operation, if the mains supply is in accordance with voltage and
frequency of the wrench
.
3.1 GENERAL INFORMATION
3.1.1 Overview and operation of the digital display
Not activated items do not appear on digital Display (7).
OPERATING INSTRUCTIONS:
Electric Torque Wrench
Series: TWE
Approved by:-
Mains
Nominal
consumption
capacity
4,7 A
1,0 kW
Page 7 of 20
TDS:-
1399
Date: 25/03/14
Protected acc. To DIN
40050
IP20