Hi-Force TLE5010 Руководство по эксплуатации - Страница 6
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Джеки Hi-Force TLE5010. Hi-Force TLE5010 18 страниц.
Печатать страницу•
NEVER exceed the maximum rated pressure or load capacity of any hydraulic cylinder. Hi-Force
manufactures its hydraulic cylinders to operate at a maximum working pressure of 700 bar (10,000
psi). DO NOT connect a pump with a higher pressure capacity rating to any Hi-Force cylinder of this
model series.
•
DO NOT adjust or remove the external pressure relief valve on any Hi-Force product.
•
Avoid lifting loads that are not central to the lifting piston. Avoid offset loading as this can damage
the cylinder bores and piston rods, and also lead to unstable load lifting.
•
NEVER invert the unit or lay it on its side, either in use, in transport or in storage.
•
DO NOT weld any items to the ToughLift unit or modify it in any way from its delivered condition.
Your warranty may be invalidated, and it could lead to serious personal injury.
•
ALWAYS use friction material under the base plate of the unit and between the jack and the load.
•
ONLY lift dead-weight (static) loads. DO NOT lift dynamic loads. i.e. Loads with a shifting centre of
mass.
•
NEVER exceed the maximum rated capacity of any hydraulic equipment. See Section 9.
•
Only use hydraulic cylinders in a complete and tested, coupled system. NEVER attempt to use a
cylinder that is not correctly coupled to its operational pump.
•
Overloading hydraulic cylinders can result in component failure and possible serious personal injury.
•
Keep hands and feet away from the cylinder during operation.
•
To protect your warranty, only use the hydraulic oil grade specified in Section 5.2.
•
When moving the unit, make sure all power source and control pendant cables are kept clear of the
wheels, to avoid possible damage or entanglement of the cables.
Hi-Force declares that this product has been tested and complies with the standards set out in the relevant
EU directives. The EU Declaration of Incorporation / Conformity is included as Annex A to this instruction
document and is supplied with all shipments of this product.
Failure to observe and obey the following safety precautions could result
in property damage, equipment damage or minor/ moderate personal
injury;
3.0 Declaration of Incorporation / Conformity
Operating Instruction Manual:
OM-TLE50-01
6
From Serial Number:
All