Great Lakes GL48SR Руководство по установке - Страница 3
Просмотреть онлайн или скачать pdf Руководство по установке для Стойки и подставки Great Lakes GL48SR. Great Lakes GL48SR 8 страниц. 19" eia wall mount swing rack
Также для Great Lakes GL48SR: Руководство по установке (12 страниц)
Печатать страницу
MAXIMUM LOAD CAPACITY:
50 pound capacity for every size of SR Swing Rack
To maintain uniform distribution of the mechanical load in the SR Swing Rack,
load the heaviest equipment first, at the bottom of the SR Swing Rack and load
the lighter units at the top.
SERVICE
The SR Swing Rack should be repaired by personnel trained by Great Lakes,
or returned to Great Lakes for repair or replacement. Contact Great Lakes
Technical Support at 814.734.7303 or at werackyourworld.com
WHAT'S INCLUDED
SR Swing rack
50 X 12-24 x ½" Philips pan head screws
This user's manual
MOUNTING INSTRUCTIONS
Wood Studded Wall
Once the location on the wall has been determined, inspect the wall surface.
The wall must be flat and square in the horizontal and vertical plane to ensure
the SR Swing Rack closes correctly. If the wall is not flat and square, you might
be required to use shims.
Wood studded wall mounting instructions apply to a 2" x 4" wood stud wall with
3/4" plywood.
Recommended Mounting Hardware for Wood Studded Wall
Qty (4) 3/8 x 2" long Lag Bolts and 1" O.D. Flat Washer
Masonry Wall Surface
For masonry wall surface, the installed must provide all the appropriate
hardware.
3