Gaggenau CE481 CE491 Руководство по эксплуатации - Страница 15
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Варочная панель Gaggenau CE481 CE491. Gaggenau CE481 CE491 20 страниц. Glass ceramic cooktop
Печатать страницу
Changing the cooking time
Select the cooking zone. Touch the M symbol.
Change the cooking time.
Cancelling prematurely
Select the cooking zone. Touch the M symbol. Set it
to ‹‹. The display goes out after a few seconds. The
cooking zone continues to heat with the selected heat
setting.
Note: The cooking timer is no longer active if there is
a power cut.
Short-term timer
You can also use the integrated timer independently of
the function of the appliance as a short-term timer.
The short-term timer can also be used if all of the
cooking zones are switched off.
Setting the short-term timer
The cooktop must have been switched on at the main
switch. No cooking zone should have been selected.
Touch the M symbol.
1
‹‹ lights up on the timer display.
2
Use the magnetic knob to set the required
cooking time.
If all of the cooking zones are switched off, the
appliance goes into stand-by mode. Only the timer
display lights up.
When the cooking time has elapsed, the ‹‹ display
flashes. A signal sounds for 3 minutes. Touch the M
symbol. The display goes out and the audible signal
ceases.
To correct the cooking time, touch the M symbol and
use the magnetic knob to change the cooking time.
Note: The short-term timer no longer functions after a
power cut.
Safety shut-off
A cooking zone is automatically switched off if the
setting is not changed for a long time. The time when
the safety shut-off is activated depends on the heat
setting selected (1 to 10 hours).
The cooking zone is switched off and the residual heat
indicator lights up on the heat setting display until the
cooking zone cools down.
You can switch the cooking zone back on again as
normal.
15