6K Products DH0610 Руководство по эксплуатации и запчастям - Страница 5

Просмотреть онлайн или скачать pdf Руководство по эксплуатации и запчастям для Бензопила 6K Products DH0610. 6K Products DH0610 17 страниц. Connect and cut hydraulic chain

Печатать страницу

After assembling the components as shown in figure 1, position the saw bar square to the log, at the correct height

with clearance between the bar guard and the side of the largest log and weld down solidly (Fig. 4).

Fig. 4

Hydraulic Connections

The hydraulic requirements to operate the saw are 29 to 35 gallons per minute at 2000 psi from a directional control

valve that has port A and B blocked in the neutral position. These pictures are examples of valve spool that will

work.

The hydraulic valve can be manual or electric control. Figure 5 shows hose

connections for correct operation.

Fig. 5