Great Lakes Biostar Scan Руководство по эксплуатации - Страница 13

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Стоматологическое оборудование Great Lakes Biostar Scan. Great Lakes Biostar Scan 16 страниц.

Печатать страницу

Note: To ensure a tight seal between the pressure chamber and the cup, pellets should be

completely removed from around the rim.

At this point in the process, the material has been formed over the model and is cooling under

pressure.

At the end of the cooling phase, a series of short beeps will sound. Release the pressure

by pressing the air evacuation button. Another series of short beeps will indicate when the

pressure has cleared and the chamber can be unlocked and open. To unlock the chamber,

swing the locking handle from the front of the unit to the back. Move the clamping frame

handle to the left until it stops releasing the material.

To initiate heating, swing the heating element

over the clamped material and the programmed

time will start to count down automatically. With

five seconds remaining in the heating phase,

a series of short beeps will sound, at zero, a

sustained beep will sound.

Swing heater back to its full rest position. Swing

the chamber over the model and activate the air

pressure by moving the locking handle from the

back of the machine to the front of the machine

until it locks.

The appliance is now cool to the touch and

ready for finishing.