Daxten Voyager 100 Руководство по эксплуатации и установке - Страница 7

Просмотреть онлайн или скачать pdf Руководство по эксплуатации и установке для Удлинитель Daxten Voyager 100. Daxten Voyager 100 16 страниц. Keyboard, video & mouse extender
Также для Daxten Voyager 100: Руководство по установке (8 страниц), Брошюра (2 страниц)

Печатать страницу

The connector wiring must meet the EIA/TIA 568 standart.

UTP / STP Connection Cable Wiring

The Local-Remote interconnection cable is terminated in RJ45 connectors and should

be wired according to the EIA/TIA 568 (Scheme B preferred) industry standard. The

Voyager will function with other wiring schemes, but the video quality may be

impaired.

Orientation: Looking into the RJ45 socket pin 1 is on the left and Pin 8 on the right.

Wire Colour

White/Orange

Orange/White

White/Green

Blue/White

White/Blue

Green/White

White/Brown

Brown/White

The Voyager has been tested with all major makes of CAT 5 cable including BICC-

VERO, Mohawk, and Brand-Rex. The Voyager has also been tested with most major

makes of CAT 5E and CAT6 with good results.

Note: That failure to wire the twisted pairs correctly will impair the video quality

dramatically and / or prevent correct operation.

This Voyager 100 extender is designed for use up to a maximum cable length of

100m/330ft At this length the video quality should still be acceptable even at a screen

resolution of 1200x1600 (75Hz).

Although a single continuous length of interconnect cable is preferable, operation is

possible through multiple Patch Panels. However, the more patch panels the cable is

routed through, the greater the chance of video signal degradation.

Wire Pair

T2 2

R2 2

T3 3

R1 1

T1 1

R3 3

T4 4

R4 4