Gaggenau DI 230 Руководство по эксплуатации - Страница 11
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Посудомоечная машина Gaggenau DI 230. Gaggenau DI 230 19 страниц.
Печатать страницу
Maintenance and care
A regular inspection and maintenance of your machine
will help to prevent faults. This saves time and prevents
problems.
Overall condition of the machine
Check washing chamber for grease and limescale
deposits.
If you find such deposits:
Fill the detergent dispenser with detergent, start the
appliance without utensils in the programme which
has the highest wash temperature.
Clean the appliance with detergents/ appliance
cleaners which are particularly suitable for use with
dishwashers.
Regularly wipe the door seal with a damp cloth.
Never use a steam cleaner to clean your dishwasher.
The manufacturer is not liable for any consequential
damage.
Regularly wipe the front of the appliance and panel with
a damp cloth; water and a little washing-up liquid will
suffice. Do not use sponges with a rough surface or
abrasive detergents, as these could scratch the
surfaces.
Attention!
Never use other chlorinated household detergents!
Health hazard!
Rinse-aid
As soon as the rinse-aid refill indicator lights up on
the control panel
, refill with rinse aid.
7
Filters
The filters
prevent larger remnants of food or other
24
objects from getting inside the pump. This residue can
occasionally clog up the filters.
The filter system consists of a filter cylinder, a flat fine
filter and, depending on the model, a microfilter (*).
Inspect the filters for obstructions every time the
dishwasher has been used.
By unscrewing the filter cylinder, you can remove the
filter system. Remove any food remnants and clean
the filters under running water.
Reassembly:
Insert the filter system and screw down with the filter
cylinder.
Spray arms
Lime and remnants of food in the washing water can
block the nozzles in the spray arms
the arm mountings .
Inspect the nozzles in the spray arms for blocked
holes due to remnants of food.
If necessary, pull the lower arm
it off.
Unscrew the upper spray arm
Clean both spray arms under running water.
Refit the spray arms. Ensure that the lower arm has
locked into place and the upper one is screwed tight.
and
and
22
23
upwards and lift
23
.
22
11