Great Little Trading Fleming L3818 Руководство - Страница 6

Просмотреть онлайн или скачать pdf Руководство для Внутренняя отделка Great Little Trading Fleming L3818. Great Little Trading Fleming L3818 12 страниц.

Печатать страницу

STEP 3:

Connect both pairs of legs using panel E. Turn both cam locks (#2) clockwise to

secure.

Ensure all hardware is facing inwards as shown.

Hardware for Step 3:

NOTE:

2x #2 Cam Locks

Please be aware that when assembling the legs to

panels D and E you may notice that the legs remain

loose after the cam locks have been tightened. These

2x #3 Wooden Dowels

will be secured during the next step.

STEP 4:

Attaching the legs to the desk storage.

Begin with inserting the 4 x threaded bolts (#9) directly into the 4 legs. Fully tighten

these bolts using the Allen key provided. It is important that they are tightened fully.

The remaining four bolts (#9) need corresponding barrel nuts (#8) to hold them in

place. Again, it is important that they are tightened fully.

Please note, panel F must be positioned with the larger drill holes facing away from

the legs. The hardware (#9) must insert into the larger holes and must be tightened

fully so that each bolt head is recessed into the panel as they will not be accessible

after this step.

This step can also be completed with the legs set upright on the floor and panel F

placed on top of them.

Hardware for Step 4:

8x #9 Bolts

4x #8 Barrel Nuts