Great Little Trading L5240 Краткое руководство по эксплуатации - Страница 7
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Внутренняя отделка Great Little Trading L5240. Great Little Trading L5240 9 страниц. Isla dressing table & stool
Печатать страницу
STEP 5:
Take drawer side panels (E & F) and insert 1x cam dowel (#4) into the middle
hole at the end of BOTH panels, as shown.
Now take these panels and orientate so the small drill holes on the long edge
are facing up.
Take Panel E and position 1x L-shaped runner (#10) along the edge. The
wheel of the runner should be at the same end as the cam dowel hardware,
but the other side of the panel.
If the wheel is not positioned like this, try the other runner.
Now align the drill holes on the panel with the runner and insert 3x screws
(#5) in the holes shown to secure the runner.
Take panel F and REPEAT the runner attachment steps above ensuring the
wheel of the runner is at the same end as the cam lock but the other side of
the panel. Use the drill holes as shown.
Ensure the screws are fully inserted to ensure the drawer runs smoothly.
Hardware for Step 5:
2x #4 Cam Dowels
2x #10 L-Shaped Runners
(Left & Right)
6x #5 Screws (14mm)
#5
E
F
#4
E
#4
#4
#5
#10
#5
#5
#5
#5
F
STEP 6:
Take drawer side panel E and insert 2x wooden
dowels (#11) into the holes next to the cam
dowel.
Now join drawer side panel (E) with drawer
back panel (G) ensuring that the groove on the
inside of the drawer is aligned on both panels
and the large drill holes on panel G are facing
outwards.
Once joined, insert 1x cam lock (#7) into
the larger hole on back panel (G) and turn
clockwise to secure.
REPEAT this step using drawer side panel (F) at
the opposite end of back panel (G). Ensure the
groove is aligned with the other panels on the
inside of the drawer before securing.
#5
F
7
Hardware for Step 6:
4x #11 Wooden Dowels
2x #7 Cam Locks
#11
G
#11
#7
#11
E
#11
#11
#7
#7