DAY 6 Bicycle Руководство пользователя - Страница 11

Просмотреть онлайн или скачать pdf Руководство пользователя для Велосипед DAY 6 Bicycle. DAY 6 Bicycle 16 страниц. Bicycle

The Back:

The backrests on all Day 6 bicycles can be

adjusted horizontally and vertically to fit

different sized people - all with no tools. After

adjusting the seat to the proper height, unlock

the quick release (A) below the back cushion

and slide the back cushion forward until it

rests comfortably against your back. Lock the

quick release. Next, unlock the quick release

(B) under the travel pack and move the back

cushion up and down until it fits comfortably

in your lumbar area. Lock the quick release.

NOTE: Backrests on SL models are bolted to the frame using the upper 4 holes.

On SS models, use the lower 4 holes to raise the back up.

Before riding your Day 6 bicycle, always do an inspection to make sure all parts are adjusted and

working properly. The frame and components are designed to be used in a responsible manner on

streets, trails, or grassy areas. Day 6 bicycles are not designed for racing, mountain biking, jumping,

stunt riding, riding with more than one rider, riding with heavy loads, or any extreme type of riding or

nonstandard use and the warranty will not cover any of the above riding types. You are responsible for

checking your bike before each ride and on a regular basis to make sure that the frame and parts are not

cracked, loose, or broken and are working in a proper fashion. Failure to inspect your bike could lead

to damage to your bike or severe injury or even death. If you choose not to inspect your bike and

breakage or failure occurs, you are responsible and not Day 6 Bicycles or the dealer you purchased

your bike from. Be responsible and safe - check your bike before each ride.

If you see something you are uncertain about, take your bicycle to your local bicycle dealer.

General Inspection

- Check for loose parts by raising your bicycle about 3" off the ground and dropping it on the tires.

- Make sure ALL quick release mechanisms are locked and tight.

- Make sure wheels, fork, headset, and seat post are tight.

- Check frame/welds for cracks and bends. Immediately replace a damaged frame as this can cause a

crash and lead to a severe injury. Take immediately to your local bicycle dealer.

Bicycle Inspection