DAY 6 Bicycle Руководство пользователя - Страница 7

Просмотреть онлайн или скачать pdf Руководство пользователя для Велосипед DAY 6 Bicycle. DAY 6 Bicycle 16 страниц. Bicycle

1. Loosen the brake cable bolt on left brake arm until cable moves freely.

2. Squeeze pads until they are completely touching rim. (5:1)

3. Release pads until they are BOTH 1/16" - 1/8" from the rim. (5:2)

4. Tighten brake cable bolt.

NOTE: The bottom side of the brake pads should be even with the edge of the ri m. If they are too far

up they will rub on the tire and could cause a flat. To adjust pads, loosen bolt on side of pad with 5mm

wrench. Move pad to desired location and tighten bolt. (5:3)

Spin wheel. If the tire rubs the brake pa

Phillips screwdriver needed) on that side to pull the pad away from the rim. Turn the adjustment screw

counterclockwise to allow the pad to get closer to the rim until the rim is centered between the pads. If

rim hits both pads you may have to loosen the brake cable bolt and allow pads to move slightly further

away from the rim. If rim does not spin evenly or it 'wobbles', you w ill have to take it t o a bike shop

to have it trued. Brake lever should be about 1" from the hand grip when fully engaged. If closer than

this, tighten cable.

Rear brakes should be adjusted in the same manner.

Step 5: Adjust brakes

5:1

d on on e side, turn the adjustme nt screw clockwise (5:4,

5:3

5:2

5:4