Dynabrade 53046 Руководство - Страница 4

Просмотреть онлайн или скачать pdf Руководство для Сверло Dynabrade 53046. Dynabrade 53046 4 страницы.

Печатать страницу
Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade
Disassembly/Assembly Instructions - (continued)
14. Using a 34 mm crow foot and a torque wrench set at (34 N•m/300 in. - lbs.), secure the gear case housing and lock nut in place.
15. Press 54520 Bearing and then gear onto spindle shaft, making sure drive hexes are aligned.
16. Place 01486 Silencer over spindle shaft at threaded end.
17. Slip bottom wick over spindle shaft, then place top wick over spindle shaft.
18. Insert spindle shaft assembly into 02031 Housing.
19. Torque 02035 Lock Nut to 23 N•m/200 in. - lbs.
20. Shim spindle assembly using shims if required.
Note: When assembling angle-head assembly onto the motor housing, make sure flats on the wicks are both facing the pinion or tool will not run.
Tool Assembly Complete. Please allow 30 minutes for adhesives to cure before operating tool.
Important: Before operating, place 2-3 drops of Dynabrade Air Lube (P/N 95842) directly into air inlet with throttle lever depressed. Operate tool for
30 seconds to determine if tool is operating properly and to allow lubricating oils to properly penetrate motor. Motor should now be tested for proper operation at
90 PSIG. If motor does not operate properly or operates at a higher RPM than marked on the tool, the tool should be serviced to correct the cause before use.
Loctite
is a registered trademark of Loctite Corp.
®
96179 Motor Tune-Up Kit
•
Includes assorted parts to help
maintain and repair motor.
®
Dynaswivel
•
Swivels 360° at two locations which allows an
air hose to drop straight to the floor, no matter
how the tool is held.
94300 1/4" NPT.
Dynabrade Angle Gear Oil
•
Specifically formulated to saturate wick system in right
angle gear head.
•
Easy to apply using Dynabrade P/N 95541 Oil Gun.
Apply 3 plunges every 8 hours of operation into tools
lubrication fitting.
95848: 2 oz. tube
95849: 10 oz. tube
Expect a
gear life of
500 hours
minimum,
with proper
lubrication.
Visit Our Web Site: www.dynabrade.com
DYNABRADE, INC., 8989 Sheridan Drive • Clarence, NY 14031-1490 • Phone: (716) 631-0100 • Fax: 716-631-2073 • International Fax: 716-631-2524
DYNABRADE EUROPE S.àr.l.,
© DYNABRADE, INC., 2000
Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade
Optional Accessories
Apply 3 plunges
into lubrication
fitting every
8 hours of
operation.
Zone Artisanale • L-5485 Wormeldange—Haut, Luxembourg • Telephone: 352 76 84 94 1 • Fax: 352 76 84 95 1
52296 Repair Collar
•
Specially designed collar for use in vise to prevent damage
to valve body of tool during disassembly/assembly.
Dynabrade Air Lube
•
Formulated for pneumatic equipment.
•
Absorbs up to 10% of its weight in water.
•
Prevents rust and formation of sludge.
•
Keeps pneumatic tools operating longer
with greater power and less down time.
95842: 1pt. (473 m)
95843: 1gal. (3.8L)
Open-End Wrenches
95262 – 14 mm open-end.
®
DYNABRADE
PRINTED IN USA