Dynabrade 61200 Инструкции по безопасности, эксплуатации и техническому обслуживанию - Страница 4
Просмотреть онлайн или скачать pdf Инструкции по безопасности, эксплуатации и техническому обслуживанию для Пылесос Dynabrade 61200. Dynabrade 61200 12 страниц. Electric drum vacuum
Печатать страницу•
Do not use the equipment or touch any electrically conductive surfaces if switch does not function correctly. Unplug vacuum and seek qualified electrical personnel.
•
Store idle equipment out of the reach of children and do not allow persons unfamiliar with the equipment or these instructions to operate the equipment.
•
Use the equipment, accessories, etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.
•
Regularly clean the equipment's air vents. The motor's fan will draw the dust inside the housing and excessive accumulation of dust may cause electrical hazards.
•
Do not operate equipment with vacuum head removed from DrumVac assembly.
•
Do not operate equipment in explosive environments, such as in the presence of flammable liquids, gases, and or combustible dusts based on NFPA standards.
•
Avoid body contact with earthed or grounded surfaces such as pipes and radiators. Ensure you are plugging your system to a grounded plug.
•
Do not expose equipment to rain or wet conditions. Water entering equipment will increase the risk of electric shock. Product nameplate depicts dry use only.
•
Plug equipment into proper outlet based on model/voltage. Always use a grounded power supply. There is an increased risk of electrical shock with an ungrounded
power supply. If a power extension cord is used, ensure it is rated for associated model and power requirements.
•
Do not use the equipment as a means of transportation.
•
Do not transport equipment across uneven or inclined surfaces.
•
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the equipment. Keep cord away from heat, oil, sharp edges or moving parts.
•
Stay alert, watch what you are doing and use common sense when operating equipment. Do not use equipment while you are tired or under the influence
of drugs, alcohol or medication.
•
Use personal protective equipment. Always wear eye protection. Protective equipment such as dust masks, non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal injury.
•
Dress properly, Do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry or long hair can be
caught in moving parts.
•
Do not use the airline for anything other than what it is intended for. Never use the airline for carrying, pulling or unplugging the equipment. Keep airline away
from heat, oil, sharp edges or moving parts.
•
Do not use the DrumVac kit unless fully assembled as intended with drum. Ensure all vacuum connections have been made before turning unit to on position.
•
Ensure DbA level while using DrumVac does not superceed acceptable levels per operators shift, based on governing body guidelines.
•
The vacuum system will operate by an on/auto/manual switch located on the front of the Motorhead/Vacuum Head Assembly. This switch must be turned on to
activate the Motorhead.
•
Do not provide maintinance on equioment in explosive environments, such as in the presence of flammable liquids, gases, and or combustible dusts
based on NFPA standards.
•
Use the proper equipment to handle and dump the 55 (208 Liters) Gallon drum when full of collected debris. Keep all surrounding areas free of additional
operators when transport and dumping of drum takes place.
•
Use only genuine Dynabrade replacement parts to ensure quality.
To order replacement parts, specify Model # and Serial # of your equipment.
•
Have your equipment serviced by a qualified repair person using only identical replacement parts.
•
Unplug vacuum head power cord before providing all maintenance.
•
Important: A preventative maintenance program is recommended whenever dust collection equipment is used.
Ensure vacuum head is placed on a flat/sturdy surface before performing maintenance.
•
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source.
•
Do not overreach. Keep proper footing and balance at all times. This enables better control of the equipment in unexpected situations.
•
Do not let familiarity gained from frequent use of equipment allow you to become complacent and ignore tool safety principles.
A careless action can cause severe injury within a fraction of a second.
OPERATION
WARNING
CAUTION
MAINTENANCE INSTRUCTIONS
WARNING
CAUTION
EQUIPMENT USE AND CARE
4