Dynabrade RaptorVac 61203 Инструкции по безопасности, эксплуатации и техническому обслуживанию - Страница 2
Просмотреть онлайн или скачать pdf Инструкции по безопасности, эксплуатации и техническому обслуживанию для Пылесос Dynabrade RaptorVac 61203. Dynabrade RaptorVac 61203 9 страниц. Pneumatic drum vacuum
Печатать страницуRead and understand tool manual before work starts
to reduce risk of injury to operator, visitors, and tool.
Ear protection to be worn when exposure to sound,
exceeds the limits of applicable Federal, State or
local statues, ordinances and/or regulations.
Respiratory protection to be used when exposed to
contaminants that exceed the applicable threshold
limit values required by law.
Read and understand this tool manual before operating your tool. Follow all safety rules for the protection of operating personnel as well as
adjacent areas. For safety information, refer to Code of Federal Regulation –CFR 29 Part 1910, NFPA 79, NFPA 70, NFPA 652, IEC, ISO 12100, ISO
14121-2 TR, EN 50281, EN 50495, EN 14986, EN 15188, EN 16009 –Safety Requirements and applicable State and Local Regulations.
Some dust created by sanding, grinding, drilling, and other construction activities contain chemicals known to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals are:
•
Lead from lead-based paints
•
Crystalline silica from bricks and cement and other masonry products
•
Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals:
work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out
microscopic particles.
•
Do not use for explosive metallic dust (Aluminum, Magnesium, etc.)
•
Never use to exhaust chemical vapors.
•
Not to be used for the collection of hot embers / dust particles.
Tool Intent:
The intended use of portable complete vacuum head assembly kit to be used with 55 gallon drums for the safe collecting of dust/chips captured through
the process of sanding with hand tools/General purpose of non-metallic materials such as wood, fiberglass, composites, and solid surface, etc.
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
Do not modify Dynabrade products, they must be used as intended. Modifying equipment may create hazardous situations.
•
Ensure that a clean dry drum is being used in conjunction with DrumVac kit.
•
When unloading equipment from box, all other operators are to remain clear of work-cell.
•
Use proper/safe methods when transporting equipment. Improper pushing and pulling methods will increase operator strain.
•
When transporting equipment from work-cell to work-cell, do not pull in operator direction.
•
Slowly remove vacuum head from packaging and stage on flat surface before assembly.
•
Slowly remove interface ring from packaging and install on top of 55 (208 Liters) Gallon Drum.
•
With air source disconnected from system, apply the vacuum head to the top of the interface ring and lock in place.
•
Ensure air supply connection is properly locked into position at vacuum head inlet.
•
Be sure to properly lock down vacuum head to interface ring with provided latches on each side.
•
Be sure to keep fingers and hands clear from pinch points upon re-assembly.
•
Ensure to install DrumVac kit together with proper 55 (208 Liters) Gallon 33" High x 22 1/2" Dia Cylindrical ASTM grade 1.1mm wall thickness, Carbon Steel
Open Head Drum. UN-Solid Rating: 1A2/X400/S
GENERAL POWER EQUIPMENT SAFETY WARNINGS
ASSEMBLY AND INSTALL
WARNING
Eye protection must be worn at all times,
eye protection to conform to ANSI Z87.1.
Practice safety requirements. Work alert, have
proper attire, and do not operate tools under the
influence of alcohol or drugs.
Electric shock hazard. Avoid bodily contact with
grounded objects, bodies of water. Do not damage
cord set.
The term "equipment" in the warnings refers to your pneumatic vacuum system.
WARNING
CAUTION
2