DynAccess Hydra Monoski Руководство пользователя - Страница 13

Просмотреть онлайн или скачать pdf Руководство пользователя для Робототехника DynAccess Hydra Monoski. DynAccess Hydra Monoski 16 страниц.

When using a chairlift:

1. Inform the lift attendants if you have any specific needs. They can slow down or stop the

chair if desired.

2. Position your outriggers upright at your sides. As the chair approaches, push down on

your outriggers to lift yourself up and back onto the seat.

PLEASE NOTE: The seat of the monoski is equipped with yellow side and rear handles for

assistance in maneuvering the rig. These can be used for ski buddies and lift attendants

to assist in lifting the monoski onto the chairlift.

3. Once on the lift, sit back as far as possible in your chair, lean back, and hold on to the

chairlift. USE A RETENTION STRAP SUITING YOU AND THE LIFT TO MAKE SURE THAT YOU

CANNOT COME OFF THE CHAIR UNINTENTIONALLY.

4. To unload, wait until you are securely over off-load ramp, then unhook the retention

strap.

5. Push off the chair and ski away from the off-load area.

PLEASE NOTE: If you are a beginner skier, you may ask one or two ski buddies or

instructors to help you get off the lift and balance you when skiing away from the off-

load area.

Warning!

Never use the red evacuation straps as handles.

Warning!

Some chairs may use thick seat cushions, causing you to sit on the front part of the seat.

Make sure to push you in and sit back as far as possible and hold onto the lift chair.

NEVER ride a chairlift unless securely seated.