CEL 10.8v Li-ion Руководство пользователя - Страница 15

Просмотреть онлайн или скачать pdf Руководство пользователя для Газонное и садовое оборудование CEL 10.8v Li-ion. CEL 10.8v Li-ion 20 страниц. 10.8v li-ion cordless
Также для CEL 10.8v Li-ion: Руководство пользователя (16 страниц)

Печатать страницу

1. Battery

Operating

Sanding

The removal rate and the sanding

pattern are primarily determined by

the choice of sanding sheet, the

preset oscillation rate and the

applied pressure.

Flawless sanding sheets achieve the

best sanding capacity and extend the

service life of the machine.

Try to apply uniform sanding

pressure; this increases the working

life of the sanding sheets.

Additional pressure does not lead to

an increased sanding capacity, only

increased wear of the machine and

the sanding sheet.

For precise on-the-spot sanding of

edges, corners and hard to reach

areas, it is also possible to work only

with the tip or an edge of the sanding

plate.

When selectively sanding on the

spot, the sanding sheet can heat up

considerably. Reduce the oscillation

rate and allow the sanding sheet to

cool down regularly.

A sanding sheet that has been used

for metal should not be used for

other materials.

Use only original CEL sanding

accessories.

Scraping

For scraping, select a high oscillation

rate. Work on a soft surface (e.g.

wood) at a flat angle, and apply only

light pressure. Otherwise the scraper

can cut into the surface.

Sharp blades, heat buildup and

flying debris are a danger to user

and bystanders. Use of suitable

protective clothing, gloves,

footwear, eye and ear protection

as well as safe working practices

can reduce these risks.

9.0