HiB Novum N18DU60SWO Руководство по монтажу - Страница 5
Просмотреть онлайн или скачать pdf Руководство по монтажу для Внутренняя отделка HiB Novum N18DU60SWO. HiB Novum N18DU60SWO 8 страниц. Blend drawer unit
Печатать страницу
Installation
Please ensure that the wall is suitable for wall hung furniture. For stud wall
installations, add an extra timber support into the stud wall prior to finishing
1. HiB recommends removing the drawer(s) prior to installation. See Fig. 4,
overleaf.
2. Plan the unit position on the wall, ensuring there is sufficient space between the
unit and other items of furniture in the room.
3. Measure the spacing on the back of the unit, between the two inner sides of the
carcass (Fig. 1, A) this is the maximum bracket spacing. Determine the required
mounting point height.
4. Transfer measurements onto wall using a spirit level to ensure that they are
straight and level, and spaced correctly as per Fig. 1.
5. Drill holes for wall brackets and fix into position with suitable fixings.
6. Position the unit(s) onto the wall brackets.
7. Use furniture hangers to adjust alignment of furniture unit(s) (Fig. 6, screw B,
overleaf), ensuring that they are level.
8. If installing multiple units side by side, once they are both in the correct
position, clamp them together using speed clamps and fix together using the
fixings provided, as per Fig. 2.
9. Once the unit(s) are in position, adjust the screw on the furniture hanger (Fig. 6,
Screw A, overleaf) to bring the furniture tightly against the wall.
10. Refit the drawers.
11. Silicone along back edge of the drawer unit where the drawer meets the wall,
as per Fig. 3. Allow to set fully before use.
the wall to improve strength.
hib.co.uk
5