HiB NOVUM N19FS60DEM Руководство по монтажу - Страница 5

Просмотреть онлайн или скачать pdf Руководство по монтажу для Внутренняя отделка HiB NOVUM N19FS60DEM. HiB NOVUM N19FS60DEM 8 страниц.

Installation

1. Plan the position of the unit on the wall.

2. Mark the drill location onto the wall through the pre-drilled holes in the rear

cross rail of the unit. See Fig. 1.

3. Drill holes in wall and fix the unit into position with suitable fixings.

4. Silicone along the top edge of the unit and fit the basin as per Fig. 2. Silicone

along back edge of basin and along the back of the unit and wall as per Fig. 3.

Allow to set fully.

5. Fix tap in place, and finalise water and waste connections. If the waste pipe and

water feeds are routed from the floor, then the base of the unit will need to be cut

to accommodate this. Do not remove more material than necessary. All cut edges

must be sealed with the sealant provided to prevent water ingress.

6. Secure handles in place using the pre-drilled holes in the drawers.

hib.co.uk