GREAT PLANES avistar elite Руководство по эксплуатации - Страница 3
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Игрушка GREAT PLANES avistar elite. GREAT PLANES avistar elite 20 страниц.
Печатать страницу
SAFETY PRECAUTIONS
PROTECT YOUR MODEL, YOURSELF & OTHERS...
FOLLOW THESE IMPORTANT SAFETY PRECAUTIONS
1. Your Avistar Elite should not be considered a toy, but rather
a sophisticated, working model that functions very much like a
full-size airplane. Because of its performance capabilities, the
Avistar, if not assembled and operated correctly, could possibly
cause injury to yourself or spectators and damage to property.
2. You must assemble the model according to the instructions.
Do not alter or modify the model, as doing so may result in an
unsafe or unfl yable model. In a few cases the instructions may
differ slightly from the photos. In those instances the written
instructions should be considered as correct.
3. You must take time to build straight, true and strong.
4. You must correctly install all R/C and other components so
that the model operates correctly on the ground and in the air.
5. You must check the operation of the model before every
fl ight to insure that all equipment is operating and that the
model has remained structurally sound. Be sure to check
clevises or other connectors often and replace them if they
show any signs of wear or fatigue.
6. If you are not an experienced pilot or have not fl own this type
of model before, we recommend that you get the assistance
of an experienced pilot in your R/C club for your fi rst fl ights.
If you're not a member of a club, your local hobby shop has
information about clubs in your area whose membership
includes experienced pilots.
7. While this kit has been fl ight tested to exceed normal use,
if the plane will be used for extremely high stress fl ying, such
as racing, or if an engine larger than one in the recommended
range is used, the modeler is responsible for taking steps to
reinforce the high stress points and/or substituting hardware
more suitable for the increased stress.
8. WARNING: The optional cowl and wheel pants available
separately for this kit are made of fi berglass, the fi bers of
which may cause eye, skin and respiratory tract irritation. Never
blow into a part (wheel pant, cowl) to remove fi berglass dust,
as the dust will blow back into your eyes. Always wear safety
goggles, a particle mask and rubber gloves when grinding,
drilling and sanding fi berglass parts. Vacuum the parts and
the work area thoroughly after working with fi berglass parts.
We, as the kit manufacturer, provide you with a top quality,
thoroughly tested kit and instructions, but ultimately the
quality and fl yability of your fi nished model depends on how
you build it; therefore, we cannot in any way guarantee the
performance of your completed model, and no representations
are expressed or implied as to the performance or safety of
your completed model.
Remember: Take your time and follow the instructions to
end up with a well-built model that is straight and true.
ITEMS REQUIRED
Field Equipment
When ready to fl y, you'll need some additional equipment to
fuel the plane and start the engine.The most important items
include an electric starter, 12 volt battery, or chicken stick, fuel
pump (electric or hand-crank), fueling lines and fi ttings and a
1.5 volt glow plug igniter.Your fl ight instructor will probably let
you share his equipment for a while, but eventually you'll need
your own. Visit your local hobby dealer or see the Hobbico
catalog for a full selection, descriptions and pricing. The
Hobbico Ultra-Tote Field Box Complete Combo (HCAP5105)
contains everything you need to start your engine, except fuel.
Required Hardware & Accessories
This is the list of hardware and accessories required to fi nish
the Avistar Elite RTF. These items are only required if you
plan to install optional fl aps. Order numbers are provided in
parentheses.
❍ Great Planes Pro
❍ Revell
®
#1 Light Duty Economy Knife w/Blade &
Safety Cap (RMXR6909)
❍ Drill bits: 1/16" [1.6mm], 5/64" [2mm]
❍ Felt-tip pen
❍ 3/32" [2.4 mm] allen wrench
Optional Flap Equipment
If you plan to install the optional fl aps, you will need to purchase
two additional standard servos and a dual servo extension.
Part numbers are provided below.
❍ Futaba
®
S3004 Standard Ball Bearing Servo
(FUTM0004)
❍ Futaba Dual Servo Extension 6" J (FUTM4130)
3
™
CA Glue Thin 1/2 oz (GPMR6001)