GREAT PLANES Dazzler ARF Руководство по эксплуатации - Страница 9

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Игрушка GREAT PLANES Dazzler ARF. GREAT PLANES Dazzler ARF 20 страниц.

3. Locate the two aluminum engine mount straps, four

8-32 x 1" bolts, four #8 lock washer and eight #8 nuts.

4. Position the engine in place on the engine mount.

Place the engine mount strap on each side of the engine.

5. Attach the engine to the mount by using the 8-32 bolts,

#8 lock washer and one #8 nut per bolt. When installing the

engine it is important that the crankshaft be 90 degrees to the

firewall. Once the engine is firmly bolted to the mount, attach

a second #8 nut to the bolt. This double-nut installation will

prevent the bolt and nut from vibrating loose.

6. Be sure the outer plastic pushrod extends through the

firewall 1-3/4" [44mm], then glue it in place to the firewall.

7. Install the braided cable into the outer plastic pushrod.

4-40 x 1/4" SHCS

RETAINER

8. Attach the cable to the throttle barrel with the screw

lock connector as shown above.

FUEL TANK INSTALLATION

1. Locate the fuel stopper assembly. Assemble it as shown.

2. Bend one of the two plastic tubes as shown.The tube with

the bend is the vent line, the straight one is for the fuel pickup.

Fuel Stopper

Assembly

To Muffler

To Carburetor

3. Complete the fuel tank assembly as shown. The final

step, once the assembly is inserted into the tank, is to

tighten the screw a few turns to pull the rubber stopper

against the wall of the fuel tank.

4. Remove the hatch to the fuel tank compartment.

Fuel Line

Fuel Clunk