GREAT PLANES F4U Corsair Руководство по эксплуатации - Страница 3
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Игрушка GREAT PLANES F4U Corsair. GREAT PLANES F4U Corsair 16 страниц. Arf plane
Печатать страницу
PROTECT YOUR MODEL, YOURSELF
& OTHERS...FOLLOW THESE
IMPORTANT SAFETY PRECAUTIONS
1. Your Great Planes Corsair Park Flyer ARF should not be
considered a toy, but rather a sophisticated, working model that
functions very much like a full-size airplane. Because of its
performance capabilities, the Great Planes Corsair Park Flyer
ARF, if not assembled and operated correctly, could possibly
cause injury to yourself or spectators and damage to property.
2. You must assemble the model according to the
instructions. Do not alter or modify the model, as doing so
may result in an unsafe or unflyable model. In a few cases
the instructions may differ slightly from the photos. In those
instances the written instructions should be considered
as correct.
3. You must take time to build straight, true and strong.
4. You must use an R/C radio system that is in first-
class condition.
5. You must correctly install all R/C and other components so
that the model operates correctly on the ground and in the air.
6. You must check the operation of the model before every
flight to insure that all equipment is operating and that the
model has remained structurally sound. Be sure to check
clevises or other connectors often and replace them if they
show any signs of wear or fatigue.
7. If you are not an experienced pilot or have not flown this
type of model before, we recommend that you get the
assistance of an experienced pilot in your R/C club for your
first flights. If you're not a member of a club, your local hobby
shop has information about clubs in your area whose
membership includes experienced pilots.
We, as the kit manufacturer, provide you with a top quality,
thoroughly tested kit and instructions, but ultimately the
quality and flyability of your finished model depends on
how you build it; therefore, we cannot in any way
guarantee the performance of your completed model, and
no representations are expressed or implied as to the
performance or safety of your completed model.
Remember: Take your time and follow the instructions to
end up with a well-built model that is straight and true.
ADDITIONAL ITEMS REQUIRED
Required Radio Gear
❏
3-Channel Radio system
❏
(2) S3103 Micro servos (FUTM0037)
or
❏
(2) S3108 Micro servos (FUTM0042)
❏
(1) 6" [152mm] Servo Extension (HCAM2000)
❏
R114F-FM72MHZ Low (FUTL0442) or High band
(FUTL0443) Receiver
❏
Low band short FM receiver crystal (FUTL62**) or
high band (FUTL63**)
❏
Flight battery, either the 2-Cell 1500mAh LiPo pack
from Great Planes (GPMP0830) or 8-cell 650mAh
NiMH pack (GPMP0106)
❏
10 Amp ESC such as the Great Planes C-10
Electronic Speed Control (GPMM2010)
❏
Deans Male Ultra Plug (WSDM1302)
(needed only for use with LiPo Battery)
A charger capable of charging 2-cell (7.4V) LiPo batteries
such as the ElectriFly PolyCharge 1-3 cell LiPo charger
(GPMM3010) must be used. If using another charger, it
must be a LiPo charger or have a LiPo charging mode.
Never charge LiPo batteries with chargers not intended for
LiPo batteries or chargers on NiMH or NiCd settings.
Overcharging or explosion may result. In addition to the
PolyCharge, the ElectriFly Triton
Cycle Elite (HCAP0280) are also suitable chargers. The
Triton and Accu-Cycle Elite
and NiCd batteries used to fly the Great Planes Corsair Park
Flyer ARF.
Adhesives and Building Supplies
This is the list of Adhesives and Building Supplies that are
required to finish the Great Planes Corsair Park Flyer ARF.
Due to the foam construction, only foam safe glues and epoxy
can be used for assembly. Regular CA is not recommended as
it will aggressively attack the foam parts used in this model. In
addition to being foam compatible, the foam-safe CA is also
suitable for gluing together all of the rest of the materials (balsa,
carbon, etc...) included in this ARF.
❏
1oz Great Planes CA Medium Foam Safe (GPMR6069)
❏
1oz Great Planes CA Thick Foam Safe (GPMR6072)
3
Charger
(GPMM3150) or Accu-
™
™
are suitable for charging NiMH