GREAT PLANES F4U Corsair Руководство по эксплуатации - Страница 7

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Игрушка GREAT PLANES F4U Corsair. GREAT PLANES F4U Corsair 16 страниц. Arf plane

BUILDING INSTRUCTIONS

❏

1. Remove the servo arm before inserting the aileron

servo as shown. If necessary, trim the foam slightly to allow

the servo to clear the wing opening. The servo lead should

exit the servo bay through the notch in the servo tray.

❏

2. Glue the servo in place using thick, foam safe CA.

Epoxy may be used to glue the servo, but CA is easier to

remove should the servo need replacing in the future.

❏

3. Temporarily connect the aileron servo to your radio

system. Be sure all sticks and trims are centered when you

turn on the radio. This will center the aileron servo.

❏ ❏

4. Attach a servo arm to the servo as shown and cut

off the unused arms. The arm should point straight towards

the LE with the servo centered.

❏ ❏

5. Locate one of the black nylon control horns.

Make a small cut through the aileron in the area marked for

the control horn.

❏ ❏

6. Apply a drop or two of thick, foam safe CA to the

control horn and push it through the cut. The horn should sit

flush on the aileron. Press a black nylon back plate onto

the control horn as shown. Glue the back plate in place

using thin, foam safe CA.