GREAT PLANES Fling DL ARF Руководство по эксплуатации - Страница 7

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Игрушка GREAT PLANES Fling DL ARF. GREAT PLANES Fling DL ARF 16 страниц.

❏

9. Repeat steps 1-8 for the other wing half.

Join the Wing

Rear View

❏

1. With the front half of the left wing flat on your

workbench and the center joint on wax paper, raise the right

wing tip 3-1/8" [79mm] to properly set the dihedral. Block the

raised right wing at the desired height and make a mental

note of the position needed for it to maintain that dihedral.

❏

2. Remove the joiner from the wings. Cover the joiner, left

and right wing ribs and pockets in the wing panels with a

moderate, but not excessive, amount of 30-minute epoxy.

Join the wing halves together. Ensure that the left wing

remains flat and that the right wing tip is 3-1/8" [79mm] from

your work bench and can remain that way undisturbed until

the epoxy has hardened. Remove any excess epoxy with a

paper towel and denatured alcohol, being careful not to

disturb the joint. Hint: Use masking tape to hold the wing

together while the epoxy hardens.

3-1/8" [79mm]

Top View

❏

1. Slide the canopy forward.

❏

2. Lift the rear of the canopy so the wire clears the fuse.

❏

3. Slide the canopy aft until the front wire releases.

❏

4. To attach the canopy, reverse the previous steps.