GREAT PLANES Spectra Select Руководство по эксплуатации - Страница 3
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Игрушка GREAT PLANES Spectra Select. GREAT PLANES Spectra Select 12 страниц. Ready-to-fly 2-meter electric sailplane
Печатать страницу
The SPECTRA SELECT is a very stable and predictable
aircraft, allowing pilots of differing skill levels to enjoy it. It is
easy to build, flies great, and would be a great selection as
your first R/C airplane.
PREPARATIONS
Building Supplies and Tools
These are the building supplies and tools that are required.
We recommend Great Planes brand accessories.
Phillips Screwdriver
Pliers
Great Planes Pro
™
Threadlocker (GPMR6060)
Optional Supplies and Tools
Top Flite
®
Sealing Iron (TOPR2100)
Top Flite Hot Sock
™
Top Flite Heat Gun (TOPR2000)
Other Required Items
8-AA Alkaline Batteries
Charger for 7-cell, 2100 mAh NiCd Battery.
1/64"
=
.4 mm
1/32"
=
.8 mm
1/16"
=
1.6 mm
3/32"
=
2.4 mm
1/8"
=
3.2 mm
5/32"
=
4.0 mm
3/16"
=
4.8 mm
1/4"
=
6.4 mm
Iron Cover (TOPR2175)
Metric Conversions
3/8"
1/2"
5/8"
3/4"
1"
2"
3"
6"
Remove the fuselage, wing panels, rudder assembly and
stabilizer assembly from their individual bags. Inspect all
items closely to check for any damage. If any damage is
found, contact the place where your SPECTRA SELECT
was purchased, or Hobby Services, to obtain a
replacement for your damaged items.
Your SPECTRA SELECT is covered using Top Flite
MonoKote
®
covering. Eliminate any wrinkles you find in the
covering by shrinking them away with a heat gun. Then,
apply pressure to the area with a covering iron and a
hot sock. This will securely bond the covering to the wood
so the wrinkles will be less likely to reappear in the future.
Important Building Notes
Several times during construction we refer to the "top" or
"bottom" of the model or a part of the model. It is
understood that the "top" or "bottom" of the model is as it
would be when the airplane is right side up and will be
referred to as the "top" even if the model is being worked on
upside-down.
=
9.5 mm
=
12.7 mm
=
15.9 mm
=
19.0 mm
=
25.4 mm
=
50.8 mm
=
76.2 mm
= 152.4 mm
3
General Inspection
12"
= 304.8 mm
18"
= 457.2 mm
21"
= 533.4 mm
24"
= 609.6 mm
30"
= 762.0 mm
36"
= 914.4 mm
®