GREAT PLANES Yard Stik ARF Руководство по эксплуатации - Страница 10

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Игрушка GREAT PLANES Yard Stik ARF. GREAT PLANES Yard Stik ARF 16 страниц.

9. Mount the motor to the fuselage with the front and

rear mounting straps and two #2 x 1/2" [13mm] screws

(the larger strap goes in front). The straps should also be

arranged so the screws go in from the left side. Tighten the

screws enough to secure the motor, but do not strip out the

plastic. When viewing the motor from above, the motor

should be centered on the fuselage.

FINAL SET UP

It will be a little easier to set up the radio

before mounting the wings.

1. Determine how the receiver and speed controller will

be positioned. Make sure all the wires will reach their

connections. Mount the speed controller to the receiver and

mount the receiver to the battery holder using double-sided

foam mounting tape. Connect all the wires. Use the black

strips provided on the decal sheet to tape the receiver

antenna to a few locations along the fuselage boom. Hint:

Use small pieces of fuel tubing (not supplied) to neatly hold

the servo wires together.

Caution: Do not connect the motor wire to the speed

controller unless flying the model or setting up the radio on

the workbench. Otherwise, the motor could unintentionally

and unexpectedly turn on.

2. For safety, remove the propeller from the motor. This

will prevent potential injury in case the motor unexpectedly

turns on while setting up the radio.